Winter weather coming: Ensure your roof is ready for cooler temps and rain.
Foam Roof Coating & Recoating
Extend Your Foam Roof's Life With Professional Recoating
License #362945 • Fully bonded and insured to protect your property
Verify our license at ROC.AZ.GOVFoam Roof Services
Foam Roof Recoating
Regular recoating every 5-10 years prevents UV damage and extends your foam roof indefinitely.
- Surface cleaning & prep
- Minor foam repairs
- Fresh elastomeric coating
- UV protection restoration
New SPF Installation
Complete spray polyurethane foam roofing system. Seamless, energy-efficient, and ideal for Arizona's flat roofs.
- R-6.5 per inch insulation
- Seamless waterproof barrier
- Lightweight (no structural load)
- Reflective coating finish
Foam Roof Repair
Fix damaged areas before they become major problems. Quick turnaround on most repairs.
- Puncture repair
- Blistered coating removal
- Seam repairs
- Drain area fixes
Why Foam Roofs Need Regular Recoating
Spray polyurethane foam (SPF) roofs are one of the most durable and energy-efficient roofing systems available in Arizona. However, the foam itself is vulnerable to UV radiation, which is why it's protected by an elastomeric coating.
The Recoat Cycle
Arizona's intense UV exposure (300+ sunny days/year) gradually degrades the protective coating. Regular recoating every 5-10 years prevents UV damage to the foam and extends your roof's life indefinitely.
Signs Your Foam Roof Needs Recoating
⚠️Early Warning Signs
- • Coating appears chalky or faded
- • Coating surface feels rough/deteriorated
- • Slight color change from original
- • Roof is 5-8 years old
🚨Urgent Indicators
- • Foam visible through coating
- • Coating peeling or blistering
- • Active leaks
- • Roof age over 10 years
Benefits of Regular Recoating
Cost Savings
Preventive maintenance costs 40-60% less than reactive repairs or replacement
Extended Life
Properly maintained foam roofs can last 50+ years vs. 20-25 without recoating
Energy Efficiency
Fresh reflective coating reduces cooling costs by 15-30% in summer
Our Foam Roof Recoating Process
Inspection & Assessment
Comprehensive evaluation of coating condition, foam integrity, and drainage.
Power Washing
Remove dirt, debris, and loose coating material to ensure proper adhesion.
Foam Repairs
Address any damaged areas, punctures, or gaps in the foam layer.
Surface Preparation
Primer application if needed based on existing coating condition.
Elastomeric Coating
Professional application of high-quality, UV-resistant coating system.
Detail Work
Hand-coating penetrations, edges, and critical areas for full protection.
Final Inspection
Quality check and warranty documentation with recommended recoat timeline.
Common Questions
How often should I recoat my foam roof?
In Arizona, plan for recoating every 5-10 years depending on coating quality and UV exposure. South-facing roofs may need more frequent attention.
Can I walk on a foam roof?
Yes, but minimize traffic. Foam roofs are walkable but can be damaged by heavy equipment or frequent foot traffic. Use walk pads for regular maintenance areas.
What's the best time of year for recoating?
Spring (March-May) and fall (September-November) offer ideal conditions. Avoid monsoon season (June-September) and extreme summer heat for best coating adhesion.
Protect Your Foam Roof Investment
Schedule a free foam roof inspection and recoating estimate
Call (602) 529-3311